The Pedrollo PKm is primarily used for small-scale and domestic water transfer uses. The pump body is constructed of cast iron, and a brass insert has been installed into the front housing to enhance starting performance and prevent jamming. Brass makes up the fan. A sturdy, dependable, and affordable pump.
The pumps have been remodelled and re-engineered offering the following benefits;
- Pedrollo logo inserted in the body pump
- Quiet operation due to the anti vibration system between shaft and impeller
- More compact
- More efficient motor with low energy consumption and lower operating temperature.
- Special paint which gives improved resistance against environmental corrosion
- Longer life
Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.
Pumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.
Enclosure Class: PKM65: IP44
Voltage: 1 x 24V
Insulation Class: F
Pumped Liquid: Thin Clean Chemically Non-aggressive Liquid without solids or Fibers.
Max Temp: +60 C
Max Ambient Temp: +40 C
Max Suction Lift: 7m at sea level
Max Operating Current(A): 3.4
Dimensions(DN1 , DN2) mm: 1” , 1”
Dimensions (L,H,H1,W): 235, 152, 63, 118
Weight (Kg): 6.6
There are no reviews yet.